Metal Meet Forums  

Go Back   Metal Meet Forums > General Sheetmetal Shaping Discussion > General metalshaping discussion

General metalshaping discussion Wide ranging discussions, with the focus always on metalshaping.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-13-2004, 04:44 AM
YourBoss2
Guest
 
Posts: n/a
Default Coffee roaster for BBQ grill

I saw where a member was torn between getting a coffee roaster for Christmas and some metal working tools. Here is the solution. Get the metal working tools and build your own roaster.

http://www.anywhy.com/5pound.html
Reply With Quote
  #2  
Old 12-17-2004, 04:14 PM
Catbird
Guest
 
Posts: n/a
Default

Here's some info concerning fabrcating a nice BBQ Drum Roaster setup. The last link is a Coffee Bean Co-op. The prices for green beans are cheap,cheap. I BBQ roast and giveaway presents of Beans/Ground coffee and supply the FBO at my airport. These roasters work very well once you get the hang of it. The S.S. 304 I believe I used was 16Ga. @1/8 hole size, 3/16 spaeing with 63% open space. A 2LB. dimension is 9"x6". and a 4 Lb. is 12" X 8". Here's the links.

http://www.sweetmarias.com/roaster.perfortedmetals.html

http://rkdrums.com/index.htm

http://www.homeroaster.com/intro1.html

http://www.greencoffee.coop/index.php
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 10:07 AM.


Copyright image