Metal Meet Forums  

Go Back   Metal Meet Forums > Vendor Market Place > Jim Moser Imagineering

Jim Moser Imagineering Tools

Reply
 
Thread Tools Display Modes
  #1  
Old 03-21-2014, 07:28 PM
Jim Moser Jim Moser is offline
 
Join Date: May 2010
Location: Grass Valley, Ca.
Posts: 21
Default Speed Bumps Louver Dies

We introduced these new style louvers several years ago and have sold die sets to shops all over the country.... there is even a set in Tasmania ! Since the original dies were made we have added an upper die with an 1/8" lower profile.

Die sets sell for $550 with one upper die, or $750 for both. They can be purchased from Bonneville Bad Boys (530-432-3020) Or directly from me (530-273-7615)

They are designed to fit the Mittler Bros. press but can be adapted to other configurations. The upper die and the cutting edge of the lower die are heat treated, but the base is not, so it can be modified as necessary.

For anyone who would like to use this style louver on their project, but do not have access to a press, I will refer them to someone in their area whenever possible.
Attached Images
File Type: jpg Speed Bumps flyer flat72 copy.jpg (160.4 KB, 266 views)
File Type: jpg Speed Bumps low profile die flyer flat72.jpg (85.5 KB, 264 views)
Reply With Quote
  #2  
Old 03-21-2014, 07:39 PM
Jim Moser Jim Moser is offline
 
Join Date: May 2010
Location: Grass Valley, Ca.
Posts: 21
Talking John Nissen's 36 Dodge Roadster Pickup

John Nissen of Nissen's Hot Rod Garage in Williams, Ca. bought our first set of Louver Dies, and used them on his 36 Dodge Roadster Pickup which was just featured in the April issue of Street Rodder. John punched them on an angle, which I think is pretty cool ! Here are a couple pictures....
Attached Images
File Type: jpg Picture 3.jpg (103.5 KB, 262 views)
File Type: jpg Picture 4.jpg (70.6 KB, 261 views)
Reply With Quote
Reply

Tags
dies, louvers, speed bumps

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:06 PM.


Copyright image