|
|
|||||||
| Other metalshaping events Information about regional MetalMeet events. and other metalshaping events |
 |
|
|
Thread Tools | Display Modes |
|
#21
08-20-2012, 09:12 AM
|
||||
|
||||
Hey John, you were missed... and not just for the lemonade and cookies.!!
This years theme was "do more with less".... We didn't use any powered equipment at all, but we able to make some stuff.. Jay got some more done on his grill shell, and Kirk put on a couple of very clear and informative demos about Shape vs Form, and the use of Flexible Shape patterns. We shared some good Ideas and picked up a few tricks and tips from each other. Like using right and left snips together so as not to distort a panel when trimming.. Of course there was the tuck shrinking demos and hand plannishing techniques shown...... It was a small group but a high quality time...
__________________
Bill Two things I've learned... 1) The Amateur gets excited when things go right, The Professional gets excited when things go wrong! 2) There comes a point when you realize that you aren't going to do anything productive for the rest of the day....... http://mysite.verizon.net/billsmetal/ 
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
