|
|
|
|
#1
06-30-2012, 08:20 AM
|
|||
|
|||
Shrinker and stretcher for sale
I'm retiring and cleaning out garage!
Will accept offers and will sell at swapmeet prices! I have used and sold half dozen foot machines in the past and quite a few dozen hand opperated hobby machines. So i know what these are but no longer have use for them! Marchant's are type 1A-2A and 1A-2B air operated machines. Have one for 17 inch min radius! Have one for repair or parts has leg missing if you hang it from tool balancer leg is not needed. Oh i have two new 40lb air tool balancers also! Marchant's Weight about 35 lbs each. Some people like these but the cost for new ones is, around $9 grand a piece! Cosmetic damage only on these shrinkers they work! All Parts are avaliable from marchant they will stipple jaws for $200 a set. Jaw parts for foot operated machines 35 year collection of extra jaws some matched and miscellaneous loose extra jaws for several brands of erco, marchant, and townsand,as well! I dont have part numbers but will post pictures if i get any response from this! If you need missing jaws contact me for what your looking for! Have Milwaukee model X-181 hand held Planishing hammer with three frames, made 5 dies for it, still need to radius them , works great! Have industrial nibbler head could be used to fab a small pulmax machine? Last edited by POPPY2011; 07-05-2012 at 09:19 PM. 
|
|
#2
07-07-2012, 01:23 PM
|
|||
|
|||
|
POPPY2011 Items for sale
You can see my picture albums at these links below!
http://www.metalmeet.com/forum/album.php?albumid=519 http://www.metalmeet.com/forum/album.php?albumid=521 http://www.metalmeet.com/forum/album.php?albumid=520 http://www.metalmeet.com/forum/album.php?albumid=517 http://www.metalmeet.com/forum/album.php?albumid=518
|
|
#3
07-07-2012, 05:19 PM
|
|||
|
|||
|
Pricing for my metalworking tools!
marchant air shrinkers $1800 to $2400 each
marchant kick shrinker dies with ramps/springs $850 set of four jaws. milwaukee planish hammer $850 misc shrinker stretcher die jaws only see picts make offer for all or 1 jaw at a time want to sell in matched pairs if i have matched pairs $200 to $300---(pair of two) thats not 4 jaws make offer i had to start someware! will add new items with pictures as i can, niagra 36 in roll , large niagra/pexto heavy beading dies only, hand held planish head only?, 2 hand held spot welders, too many items to list as something sells then i can bring out whats hid behind it! mudbug58@gmail.com Last edited by POPPY2011; 07-13-2012 at 02:40 PM.
|
|
#4
07-07-2012, 06:46 PM
|
||||
|
||||
|
Did you have a streetrod shop behind Home Depot?
__________________
Rick Scott second mouse gets the cheese
|
|
#5
07-07-2012, 08:48 PM
|
|||
|
|||
|
you messaged me a price of 750 for the plannishing hammer...does that price still stand or did demand drive it up?
|
|
#6
07-08-2012, 08:41 AM
|
|||
|
|||
|
Interested in the Spot welders if you want send me more info/pics /pricing at NFord2N on aol.com ...I am looking for something that can make strong spots needed to weld in VW floor pans to the tunnel, and jeep panels at factory seams..(I inow I can do plug welds with a mig but would prefer a factory method and look..) I go thru Joplin fairly frequently when we run the Midwest so I coudl pick up...
Thank you! That is quite the collection of jaws ya have there!
|
 |
| Tags |
| marchant, planish, pullmax, shrinker, stretcher |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
