PDA

View Full Version : Eckold 653 wiring diagram

route56wingnut
11-19-2010, 11:56 AM
Does anyone out there know of anyonethat may have a 653 Eckold Kraftformer that might have an owners manual with a wiring diagram in it.Any info please contact me by PM.Dan
Pete's Metalshaping
11-19-2010, 12:35 PM
Did you try the guys at Klassic Tools Crib? They are a Kckold dealer and were at MetalMeet several years ago. Their number is (734)947-8100.
http://www.klassictoolcrib.com
CARS
11-19-2010, 02:52 PM
It hasn't been that long since you took it apart Dan. You forgot how to put it back together?? :twisted:

Good luck!
route56wingnut
11-19-2010, 03:21 PM
I got a PDF on the machine from them but it does not include the wiring diagram and Eckold doesnt have it either.Chris this is for the one on the trailer.I cut a deal with Leo for it and I have it here and am getting funny readings on a few of the relays.Just trying to hook it up correctly.
DYCE
11-19-2010, 04:46 PM
Dan I know you probably looked already but it's not on the inside of a side panel?
60 convert
11-20-2010, 06:53 AM
what does Leo say? didn't he have it hooked up with its own phase converter?
Jesse
CARS
11-20-2010, 07:40 AM
Sorry about that Dan. When you said Kraftformer I assumed it was the little guy. Now that I think about it, the little one was a Piccalo (spelling???).

Kraftformer........ wow, what did they call their big machines :rolleyes:
60 convert
11-20-2010, 09:00 AM
the 653 is the big machine and will work 6mm(.236) steel with the right dies
Jesse
Gene_Olson
11-20-2010, 10:03 AM
Darned tool junkies . . .
Dan, what aren't you going to have in that barn?

(my links page says, "Metalmeet.com, or where I honed my tool addiction.")
route56wingnut
11-20-2010, 12:59 PM
Darned tool junkies . . .
Dan, what aren't you going to have in that barn?

(my links page says, "Metalmeet.com, or where I honed my tool addiction.")

I havnt figured out how to pearmantly get you attached in the barn.