View Full Version : Finished a shrinker/stretcher model.
12-30-2004, 05:29 PM
Finished my Shrinker/stretcher model. I based it on the one someone made from Holland, which is probably a copy of one made in the US. :)
12-30-2004, 05:53 PM
Do you have any detailed drawings?
12-30-2004, 07:40 PM
I should have them finished by Sunday.
12-30-2004, 08:12 PM
The drawings for this style are already available online. I've seen them. I just can't remember where. Try a Google search on images.
12-30-2004, 08:49 PM
Here is a link to Ben's drawings. They have been posted for a long time.
12-30-2004, 09:17 PM
Yes those are the drawings I went by to make my model. I hope to have .pdf drawings made so one can print them on 8 1/2 x 11 paper.
12-31-2004, 09:57 AM
I look forward to see your drawings.
07-15-2005, 08:59 PM
Seems the link Richard posted before the server transfer doesn't work anymore.
That link redirects you to "The Jim York Gallery" (not existing)
Here's a link to the drawings:
07-23-2005, 05:25 PM
Here is my version of Ben's shrinker
1" has been added to throat and 3/4" thickness to each side.
04-24-2013, 01:26 PM
Has anyone got the shrinker drawings? I couldn't get any of the links to work.
I'm new to the forum and it's been filling my evenings!
04-24-2013, 01:31 PM
What shrinker jaws do the use ?
04-24-2013, 02:07 PM
Hi Mark and welcome to Metalmeet :)
I'll see if I can find the drawings Ben made ;)
04-25-2013, 05:04 PM
Im also interested in finding out more about this build also,
04-28-2013, 02:54 PM
I think this is the one referenced above:
04-28-2013, 07:27 PM
It is Mike :) Thanks for finding the plans!
Before you start building you should know that a combo set consisting of 2 bodies AND shrinker and stretcher jaws are available for less than $ 200! ;)
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.